Study of Abrasive Wear of Al-Zn-Mg Alloy by Taguchi Method
Adhesion wear and Abrasive wear | danebuller
Four different powder particle sizes were utilized at four different temperatures oC, oC, oC and oC and soaked for 3 hours. In this present work, the microstructures of the un-treated sample and PCMS were characterized to know the cases formed. The abrasive wear tests of the PCMS were carried out using a pin-on-disk wear tester against untreated mild steel pin having a hardness of The PMSs wear properties were evaluated, using abrasive velocity of 0. Case hardness was observed to decrease with a decrease in particle size and decreasing pack cyaniding temperature PCT. Results revealed that the case hardness of the heat treated steels is related to the pack cyaniding temperature and the particle size used.
Abrasive tool wear in metal forming processes
Abrasive wear of ferrous alloys. Liqun Xu , University of Wollongong. The investigation reported in this thesis was carried out to study the abrasive wear behaviour of three groups of ferrous alloys, comprising ten carbon steels, three tool steels and four high-strength low-alloy steels, with the particular emphasis on the effect of microstructure. The inter-relationships between wear resistance, microstructure, hardness and carbon content were studied using the carbon steels containing 0.
To browse Academia. Skip to main content. Log In Sign Up. Download Free PDF. Bhargav Prajwal.